Live site data encoding, multiple channel Full HD/SD encoding, support H.264/AAC encoding, support RTMP streaming to Flash server
1U
1U Rack-mounted chassis design, can be on a standard rack.
High density coding, can support 4 Full HD or 6 SD signs.
Support H.264/AAC codec, up to 1080p
Each channel code is supported by the main and sub stream; bitrate coding parameters of the main and sub stream can be set independently, and support up to 1080p.
Graphic size and frame rate of encoding output can be adjusted; support the ‘deinterlace’
Automatic recognition of the video input signal format, no need manual settings.
Each main stream or sub stream is supported to push to 2 broadcast servers simultaneously.
Support RTMP protocol pushing to Flash server (FMS/Wowza/VJMS3).
H.264 support ABR/CBR/CQP mode, support baseline/-main/high specification,support 1.0-5.2 level,code bitrates range from 0kbps to 30mbps and support low delay coding.
AAC support MPEG2/MPEG4 version, support MAIN/LOW/SSR/LTP complexity, code bitrates range from 10kbps to 256kbps, support RAW/ADTS of the output format.
Gigabit network interface; support remote WEB management and reset to defaults.
Embedded
Low power embedded design, easy to install and use, easy to maintain.
Support single channel HDMI/VGA/SDI coding.
Automatic recognition of the video input signal format, no need manual settings.
H.264 High Profile@ level 4.1 encoding, less than 50ms encoding delay.
Support adjustable coding rate and controllable frame quality
Support image enhancement and fault tolerance technology, strong error resilient capability, with the industry’s best image and sound performance.
AAC-LC high fidelity audio coding, support G.711 Audio Encoder.
1 analog audio input /1 analog audio output, support two-way voice intercom function.
1 RS-485 serial control interface, support PTZ control and remote control of remote decoder/PC .
Meet the standard of RTP/RTSP/RTMP/TS media transfer protocol, can be used with the majority of decode products and streaming media server in the market.
Provide 1.1/2.0 ONVIF standard management & control protocol, can be integrated automatically with the IP monitoring system.
Support Pelco-D /Pelco-P/Sony VISCA PTZ Control.
Web based interface, support online real time video preview